6HP Negative Walk In Freezer Refrigeration Unit (CE / SAA)

1. Wide range of models readily available. 2. Different Models to suit. 3. Competitive Price. 4. Energy Conservation.

Traditionally units will be supplied with Four (4) main parts as follows:1.Condensing Unit2.Electrical Control Box3.Fan Unit (Evaporator)4.Expansion ValveHowever, if you want a complete refrigeration system, it will be necessary to purchase many other additional components. You will also need to consider employing 2 ~ 3 skilled workmen and require at least 1 ~ 2 days to install and commission the refrigeration system well.

Other Accessories:1. Copper pipes for connection between the Condensing unit and Evaporator2. Control lead & fittings3. Refrigerant (R404A)4. Drainage system (drains, elbows, glue and exclusive heating coils)5. PU Pressurised Foam (to fill the hole position of cold storage)6. Assortment of screws nuts and gaskets which are used to install the Condensing unit.7. A Vacuum Pump will be required as part of the commissioning process.8. Welding of the copper pipes between Condenser unit and evaporator. Also the welding of the air control valve on the Evaporator and then connect the electrical control leads)9. Cold storage light (Moisture resistant and suitable for installation in a Cold Room situation)10. Installation of a pressure relief port and door heater cable.However, the MDX Units are Manufactured and supplied to include all of the above mentioned accessories. Each and every Refrigeration Unit is put through a stringent testing and commissioning process prior to sale. It is simply a matter of just situating any unit in the desired Cool room / Freezer Room, and plug it into your power connection, and you can immediately experience hassle free operation.

Product Features of our MDXa. Wide range of models readily available.b. Different Models to suit any application at all.c. Extensive research and cost has gone into the development, to ensure that it complies with all of the Australian and Europe requirements for such units.d. Attractive appearance and anti-rust coating applied.e. Evaporator and Condenser fins with unique multi-layer design, this allows for superior air transfer and assists to ensure a high level of operational efficiency.f. Only leading brands of Compressors are selected to ensure high efficiency, conservation of energy and low noise operation.g. Units are fitted with a variety of protection systems for the longevity of the Unit, and safety of the operator. These include delay protection (Start), overload protection, thermal protection, high pressure protection and compressor protection.h. Following the rigorous factory testing and commissioning, they are right ready for use as soon as they are delivered.

Packaging Parameters:

Drop in / Ceiling-mounted Units
Series	Model	Packing Dimension(mm)
		W	D	H
WMC (-20°C)	WMCL-6.0N	1070	680	1310
Standard Packing: With shipping plywood packing.

Configuration Parameters Form:

MONOBLOCKS	Series of Negative(-20°C)
	Equipment Model			WMCL-6.0N
	Refrigerating Capacity (W)			6000
	Total power consumption of equipment(KW)			5100
	Power supply mode			380V
	Compressor	Input power(w)		4410
		Running current(A)		7.9
		Mode		HERMETIC
		Quantity		1
	Condenser	Fan	Quantity of blower fan	2
			Power of blower of fan (W)	195x2
			Air output (m3/h)	3290x2
	Evaporator mode	space between fins (mm)		6
		Fan	Quantity of blower fan	2
			Power of blower of fan (W)	150x2
			Air output(m3/h)	2270x2
	Refrigerant			R404A
	Refilling volume of refrigerant (Kg)			4.3
	M3			30~45
	Mode of defrosting			Electric Defrosting
	Lubricant model			POE

Product View:

6HP Negative Walk In Freezer Refrigeration Unit (CE / SAA)